Hongdaer Propex fitting were designed for the installation water and heating system.The full set of fitting consists of plastic ring and brass fitting.
PLASTIC RINGS:
The ring have special property of memory, after the expansion, it will shrink to the original dimension in a few seconds.
BRASS FITTINGS:
High quality brass(CW617N, CW511L), meets European standards.
Working Pressure:≤1.6Mpa
Medium: Cold and hot water
Working temperature:0℃~95℃
Pex pipe specification: 16x1.8mm, 20x1.9mm,25x2.3mm,32x2.9mm,
16x2.2mm,20x2.8mm,25x3.5mm,32x4.4mm
- Quick and easy installation;
- Wide range of application;
- High corrosion resistance;
- Long service life;
- Save cost
1. Cut the pipe at the angle of 90°
2. Put the sleeve on the pipe
3. Use the correct tool and expand the pipe together with the sleeve
4. Insert the fitting, the pipe and ring will return to the initial position
0086-576-87410818
hongdaer@hongdaer-valve.com
Subscribe to DATA product
Copyright © TAIZHOU DEOUNI FLUID CONTROL TECH CO LTD 2023 all rights reserved
浙ICP备20001112号-1 Design & Optimize : Feisu.cn